[New Release] Nt6 X Fast Installer 100219 7z [2021]

How to Install Windows 7 Directly to USB External Drive with NT6 X Fast Installer

If you want to install Windows 7 on a USB external drive without using a virtual machine, a copy tool or a complicated tutorial, you can use NT6 X Fast Installer. This is a set of command-line scripts that can install Windows 7 (or Vista or 2008) directly from an ISO file mounted by any kind of virtual drive. You can also choose which partition is the boot partition and which letter the OS partition will occupy in Windows 7.

Here are the steps to use NT6 X Fast Installer:

Download NT6 X Fast Installer from here [^1^] and extract it to a folder.

Find the following files from Windows Automated Installation Kit (WAIK) and put them in the same folder as NT6 X Fast Installer:

imagex.exe from Windows 7 7600 WAIK (imagex from Vista can't show the WIM contents properly)

bcdboot.exe from Windows 7 (Windows 7 beta 7000 is recommended, higher version may not run in XP based WinPE and Windows 2000)

bootsect.exe from Vista or Windows 7 (Windows 7 7600 is recommended).

Mount the ISO file of Windows 7 (or Vista or 2008) with any kind of virtual drive software.

Run installer.cmd from NT6 X Fast Installer folder and follow the instructions on the screen.

After installing the OS on a USB external drive, you should open the write cache of the drive in device manager to speed up the system.

If you want to plug the USB OS to another PC, please run the command as administrator:

bcdedit /store [boot drive]:\\boot\\bcd /set {default} detecthal yes

Congratulations! You have successfully installed Windows 7 directly to USB external drive with NT6 X Fast Installer.Here are some more paragraphs to continue the article:

NT6 X Fast Installer has some advantages over the original Microsoft setup.exe for installing Windows 7. For example:

You can install Windows 7 directly from ISO file without extracting or burning it.

You can install Windows 7 from any version of WinPE and Windows 2000 or above.

You can install Windows 7 directly to USB external drive without using a virtual machine, a copy tool or a complicated tutorial.

You can manually choose which partition is the boot partition and which letter the OS partition will occupy in Windows 7.

You can install Windows 7 faster than using setup.exe. With NT6 X Fast Installer, you can install Windows 7 in 11-12 minutes for 5400rpm notebook hard drive, and in less than 10 minutes for desktop 7200 hard drive.

However, NT6 X Fast Installer also has some limitations and requirements. For example:

You need to find the imagex.exe, bcdboot.exe and bootsect.exe files from WAIK and put them in the same folder as NT6 X Fast Installer.

You need to mount the ISO file of Windows 7 with a virtual drive software before running NT6 X Fast Installer.

You need to run NT6 X Fast Installer as administrator if you want to install Windows 7 on a USB external drive.

You need to run a command to enable the hardware detection if you want to plug the USB OS to another PC.

You may encounter some compatibility issues with some drivers or software when running Windows 7 from a USB external drive.

In conclusion, NT6 X Fast Installer is a useful tool for installing Windows 7 directly to USB external drive without using a virtual machine, a copy tool or a complicated tutorial. It also has some advantages over the original Microsoft setup.exe for installing Windows 7. However, it also has some limitations and requirements that you need to be aware of before using it. 061ffe29dd